E-mail: compressorbd@yahoo.com
Wind Tunnel Technology™ protects electrical components and PC boards from contamination.
Fan-On-Demand™ cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled through machine.
Lift-Arc™ allows TIG starting without the use of high-frequency. Starts the arc without contaminating the weld with tungsten.
Adaptive Hot Start™ increases the output amperage at the start of a weld if necessary, eliminating electrode sticking.
Lightweight, aerospace-grade aluminum case offers protection with the benefit of reduced weight.
Inverter arc control technology provides greater puddle control for superior 6010 Stick electrode performance, and outstanding MIG weld performance.
Line voltage compensation keeps welding output constant even if input power varies by +/-10 percent.Line voltage compensation further expands to an amazing +37/-59 percent when operating on 460 VAC.
Process selector switch reduces the number of control setup combi nations without reducing any features.
Large, dual digital meters are easy to view and are presettable to ease setting weld output.
Model | XMT 350 CC/CV and VS | XMT 450 CC/CV | |
---|---|---|---|
Input Power | Three Phase | Single Phase | Three Phase |
Rated Out put | 350 A at 34 VDC, 60% Duty Cycle | 300 A at 32 VDC 60% Duty Cycle | 450 A at 38 VDC, 100% Duty Cycle |
Voltage Range in CV Mode | 10 – 38 V | 10 – 38 V | 10 – 38 V |
Amperage Range in CC Mode | 5 – 425 A | 5 – 425 A | 15 – 600 A |
Max. OpenCircuit Voltage | 75 VDC | 75 VDC | 90 VDC |
Dimensions | H: 17 in. (432 mm) W: 12.5 in. (318 mm) D: 24 in. (610 mm) | H: 17.25 in. (438 mm) W: 14.5 in. (368 mm) D: 27.125 in. (689 mm) | |
Weight | 80 lb.(36.3 kg) | 122 lb.(55.3 kg) |
Amps Input at Rated Load Output, 60 Hz | ||||||
---|---|---|---|---|---|---|
208 V | 230 V | 400 V | 460 V | 575 V | KVA | KW |
40.4 | 36.1 | 20.6 | 17.8 | 14.1 | 14.2 | 13.6 |
60.8 | 54.6 | 29.7 | 24.5 | 19.9 | 11.7 | 11.2 |
- | 51 | 32.1 | 27.6 | 24.4 | 22 | 18.9 |
Pulse MIG | Stick MIG TIG | Remote Control Cable | Feeder Remote Control | Weight W/Steel Wire |
---|---|---|---|---|
No | Yes | No | No | 32 lb |
Pulse MIG | Stick MIG TIG | Remote Control Cable | Feeder Remote Control | Weight W/Steel Wire |
---|---|---|---|---|
No | Yes | No | No | 66 lb |