tank mounted screw compressor dewate screw compressor potable screw air compressor air horse screw compressor refrigerated air dryer dryer and tank screw air compressor refrigerated air dryer-2 compressor-3 compressor-1 high pressure piston air compressor compressor-2 bare unit of compressor oil filter air filter line air filter screw air end desiccant dryer air receiver compressor-4 skeleton of bare unit

Gold Star® Series

gold star Superior arc welding performance with Stick and TIG welding.

Built-in arc control lets you get in tight without sticking the electrode. An electrode compensation circuit ensures consistent arc control performance regardless of the electrode size.

Hot Start™ makes it easy to start difficult Stick electrodes such as E-6010 and E-7018.

Line voltage compensation ensures consistent weld performance by keeping output power constant even if primary input power varies by ±10%.

Power efficient for exceptional value and return on your investment.

115 VAC duplex receptacle provides 15 amps of auxiliary power.                              

Thermal overload protection light indicates power shutdown. Helps prevent machine damage if the duty cycle is exceeded or airflow is blocked.

Fan-On-Demand™ operates only when needed reducing noise, power consumption, and the amount of airborne contaminants pulled through the machine

Optional digital meters for voltage and amperage. Large displays are easy to read, even at 30 ft (9.2 m)

Simple control panel features single range amperage adjustment. Provides easy, efficient operation.

14-pin receptacle provides quick, direct connection to Miller 14-pin remote controls and switches.

Enclosed circuit boards provide additional protection from contaminants resulting in longer service life

PC board protection prevents the wire feeder power or other stray voltages (less than 115 VAC) from harming the power source PC board

Power cord strain relief provided for your convenience at installation.                              

Gold Star® 302/402 Specifications

Rated Output Amperage Range Amps Input at Rated Output, 50/60 Hz
200V 230V 380V 400V 440V
Max. OpenCircuit Voltage Dimensions Net Weight
300 A at 32 VDC,60% Duty Cycle 15–395 A
70 61 35 33 31
72 VDC H: 30 in (762 mm) including lift eye W: 23 in (585 mm) D: 30-1/2 in (775 mm) including strain relief 352 lb (160 kg)

Control Panel

gold star-1
  • 1.Arc Force (DIG) Control
  • 2.Polarity Selector Switch*
  • 3.Output Switch (Contactor)
  • 4.Remote Amperage Control Switch
  • 5.Hot Start Switch
  • 6.Digital Meters (Optional)
  • 7.Amperage Adjustment Control
  • 8.Power Switch with Indicator Light
  • 9.High Temperature Shutdown Light

Performance Data

gold star-2

Gold Star® 452/602 Specifications

Rated Output Amperage Range Amps Input at Rated Output, 50/60 Hz
200V 230V 380V 400V 440V
Max. OpenCircuit Voltage Dimensions Net Weight
450 A at 38 VDC,60% Duty Cycle 20–590 A
102 89 54 51 47
72 VDC H: 30 in (762 mm) including lift eye W: 23 in (585 mm) D: 38 in (966 mm) including strain relief 404 lb (183 kg)

Control Panel

gold star-3
  • 1.Arc Force (DIG) Control
  • 2.Polarity Selector Switch*
  • 3.Output Switch (Contactor)
  • 4.Remote Amperage Control Switch
  • 5.Hot Start Switch
  • 6.Digital Meters (Optional)
  • 7.Amperage Adjustment Control
  • 8.Power Switch with Indicator Light
  • 9.High Temperature Shutdown Light

Performance Data

gold star-4

Gold Star® 652/852 Specifications

Rated Output Amperage Range Amps Input at Rated Output, 50/60 Hz
230V 380V 400V 440V 460V
Max. OpenCircuit Voltage Dimensions Net Weight
650 A at 44 VDC,60% Duty Cycle 50–850 A
124 75 71 65 62
72 VDC H: 30 in (762 mm) including lift eye W: 23 in (585 mm) D: 38 in (966 mm) including strain relief 505 lb (229 kg)

Control Panel

gold star-5
  • 1.Arc Force (DIG) Control
  • 2.Polarity Selector Switch*
  • 3.Output Switch (Contactor)
  • 4.Remote Amperage Control Switch
  • 5.Hot Start Switch
  • 6.Digital Meters (Optional)
  • 7.Amperage Adjustment Control
  • 8.Power Switch with Indicator Light
  • 9.High Temperature Shutdown Light

Performance Data

gold star-6

Genuine Miller Options

Digital Meters #300 359 Field For Gold Star models after serial # KG 283 595. Easy-to-install, front-panelmount, digital amp and volt meters.

Air Filter Kit #042 939 Field Helps protect internal components from dust and dirt, reducing need for maintenance and providing extended service life.

Ground Current Sensor #195 048 Field Disables power source if weld current is present on primary ground

Polarity Switch #043 314 Field For Gold Star 602 and 852. Allows operators to switch from DCRP or DCEN for TIG or Stick applications without removing cables.

Genuine Miller Accessories

2/0 Stick Cable Set (50 ft) #173 851 Consists of 50 ft (15.2 m) 2/0 electrode cable with holder and 50 ft (15.2 m) work cable with clamp. 350 A, 100% duty cycle.

HF-251D-1 High-Frequency Arc Starter/Stabilizer #042 388 This portable 250 amp, 60% duty cycle unit adds high frequency to the welding circuit to help start the arc when using the TIG (GTAW) process. Operates on 115 VAC 50/60/100 Hz. See Lit. Index No. AY 5.1.

Process Control Selector #042 872 Allows you to easily change weld processes from TIG to Stick without changing cables. Can be used with any constant-current,constant-voltage or multi process CC/CV welding power source.

Standard Running Gear #042 886 The large 10 in (254 mm) rear wheels and 5 in (127 mm) front casters on this running gear provide excellent mobility on the shop floor, making it easier to move the power source around and over cables and cracks.Very easy to install. Handles double as weld cable holder.

Standard Cylinder Rack #042 887 Holds two cylinders. Only installs on Standard Running Gear.

Coolant Systems

For more information, see Miller Coolant Systems Lit. Index No. AY/7.2.


Quick Contact

+88-01853-339100

+88-01853-339111